4-Channel 70MHz 1GSa/s Oscilloscope 8CH Logic Analyzer 2in1 USB 7" LCD MSO5074F

Item No.:mso5074f
The item is located in Sydney, Australia and we ship to you only 5-7 days, 3 years warranty. No shipping cost, no value
Buy it Now: AUD629.00   FREE Shipping
Quantity :
         Sub Total: AUD629.00
Manufacturer Specifications:
 Feature
  • 4 Channel Oscilloscope+8 Channel Logic Analyzer + 25MHz Arb. Waveform Generator(Only MSO5074FG).
  • Abundant Trigger type: Video, Edge, Slope, Pluse Width, Overtime, Alternative, Code-type, Duration, Queue, Repeat trigger.
  • Large 7 inch 64K color Display, WVGA: 800*480.
  • USB host and device connectivity, standard.
  • Ultrathin desigh, handy volume, easily portable.
  • VGA Optional

Oscilloscope

  • 1Gsa/s Real Sample Rate;
  • 4 Channels Oscilloscope;
  • 70MHz Bandwidth, 1M Record Length;
  • 32 automotive measurement and FFT Analysis for Simplified Waveform Abalysis.

Logic Analyzer

  • 8 Channles Logic Analyzer;
  • 500MHz Sample Rate
  • 1MRecord Length

Arb. Waveform Generator(Only MSO5074G)

  • 25MHz Arb. Waveform Generator Output(Sine wave up to 75MHz)
  • 200MSa/s Sample Rate;
  • 12bit Pattern Generator
  • 50MHz Frenquery Counter

Model MSO5074F MSO5074G
Channel 4
Bandwidth 70MHz
Rise Time 5ns
Real time sample rate 1GSa/s
Record Length 1M
SEC/DIV Range 4ns/div~40s/div
Delay time Accuracy 500ps
A/D Converter 8bit resolution
Volts/div range 2mV/div~ 5V/div at input BNC
Position Range 20ns/div to 80us/div; (-8div x s/div) to 40ms;
200us/div to 40s/div; (-8div x s/div) to 400s;
DC Gain Accuracy ±3% for Normal or Average acquisition mode, 5V/div to 10mV/div;
±4% for Normal or Average acquisition mode, 5mV/div to 2mV/div
Input
Inputs Coupling AC, DC, GND
Inpits Impendance 1MΩ±2% 20pF±3pF
Probe Attenuation 1X, 10X
Trigger System
Trigger Types Edge, Video, Pulse, Slope, Over time, Alternative
Trigger Source CH1, CH2, EXT, EXT/5, AC Line
Trigger Modes Auto, Normal, Single
Coupling Type DC, AC, Noise Reject, HF Reject, LF Reject
Trigger Sensitivity
(Edge Trigger Type)
DC(CH1,CH2, CH3, CH4): 1div from DC to 10MHz;1.5div from 10MHz to Full;
DC(EXT): 200mV from DC to Full;
DC(EXT/5):1V from DC to Full;   
AC: Attenuates signals below 10Hz    
HF Reject: Attenuates signals above 80kHz
LF Reject: Same as the DC-coupled limits for frequencies above 150kHz; attenuates signals below 150kHz
Trigger Level Range CH1, CH2, CH3, CH4: ±8 divisions from center of screen; 
EXT: ±1.2V;
EXT/5:±6V
Trigger Level Accuracy( typical) signals having rise and fall times 20ns CH1, CH2, CH3, CH4: 0.2div × volts/div within ±4 divisions from center of screen;
EXT: ± (6% of setting + 40mV);
EXT/5: ± (6% of setting + 200mV);
Set Level to 50%(typical) Operates with input signals ≥50Hz
Measurement
Cursor Measurement Manual: Voltage difference between cursors: V
             Time difference between cursors: 
T
             Reciprocal of 
T in Hertz (1/ΔT);
Tracing: The valtage and time at a waveform point;
Auto Measuerment Frequency, Period, Mean, Pk-Pk, Cycli RMS, Minimum, Maximum, Rise time, Fall Time, +Pulse Width, -Pulse Width, Delay1-2Rise, Delay1-2Fall, +Duty, -Duty, Vbase, Vtop, Vmid, Vamp, Overshoot, Preshoot, Preiod Mean, Preiod RMS, FOVShoot, RPREShoot, BWIDTH,  FRF
Math +, -, *, /, FFT
Logic Analyzer Specifications
Channels 8 Channels
Max. Input Impendence 200K(C=10p)
Input Voltage Range 0V~3V
Logic Threshold Range 0V~3V
Max. Sample Rate 500MSa/s
 Compatible Input TTL, CMOS, ECL
Sample Depth 1M
Edge Trigger D0-D7 select slope (rising or falling edge)
Pulse Width Trigger D0-D7 select pulse polarity (positive or negative pulse), trigger when (=, , >, <), trigger pulse width
Code-type Trigger D0-D15 select code-type (H, L, X)
Duration Trigger D0-D7 select persist time and trigger when (data terminate, data start, and data delay)
Queue Trigger D0-D7 select specific data index (0-3) and code-type (H, L, X)
Repeat Trigger D0-D7 select code-type (H, L, X) and repeat times
Arb. Waveform Generator Specifications (MSO5074FG)
Wave frequency DC~25MHz
DAC clock 2K~200MHz adjustable
Waveform Length 4KSa
Vertical Resolution 12 bit
Frequency stabilization <30ppm
Amplitude ±3.5V Max.
Output impedance 50 Ω
Output  current 50mA Ipeak=50mA
System Bandwidth 25M
Wave distortion -50dBc(1KHz),  -40dBc(10KHz)
Frequency area DC~50MHz
Input Amplitude   400mVpp~18Vpp
Coupling DC
Frequency precision ±Time Base Error ±1 Count
input impedance > 100KΩ
Pattern Generator 12Bit
General Feature
Supply Voltage 100-120VACRMS(±10%), 45Hz to 440Hz, CAT
120-240VACRMS(±10%), 45Hz to 66Hz, CAT
Power Consumption <30W
Display Type 7 inch 64K color TFT LCD,(WBGA 800*480)
Size & Weight 385*200 * 245(mm), 3.5kg

Write a Review

Tell us what you think about this item and share your opinions with other people. Please make sure your review focuses only on this item. All reviews are moderated and will be reviewed within two business days. Inappropriate reviews will not be posted.

After-sales questions and issues: Contact our Customer Service Department. (A customer representative will get back to you).

Please Sign In first if you want to later edit or manage reviews uploaded by yourself.

* Rating:
    Please select rating stars.
* Your First & Last Name:
* Your E-Mail Address:
* Review Title:
* Review Detail:
Newsletter
Stay Tuned!
Get updates on sales and discount offers.